Calculators and Protocols
PHIUS and the high-performance building community are continually creating and updating tools that make passive building energy modeling more accurate and efficient. PHIUS has assembled a list of resources below; be sure to check back often for further updates and additions.
This calculator generates PHIUS+ modeling input values from available data for AHRI-listed commercial equipment.
This whitepaper describes how to model ERVs and HRVs for passive building projects.
This .zip package includes a comprehensive Tech Corner article on calculating the performance of heat pumps for passive building modeling, as well as two accompanying .xls calculators.
This .xls table provides specifications for HVI-rated equipment, with values adjusted for PHIUS+ project modeling.
This spreadsheet calculates the global warming potential (GWP) of insulation products. PHIUS recommends using this calculator to better understand a product’s GWP prior to making a final selection.
A handy inch-pound to metric calculator tailored for CPHCs.
This calculator is used to determine the minimum critical interior surface temperature to avoid mold risk at a thermal bridge or corner. This value should be used when modeling this particular junction in THERM, and is based on both climate and interior humidity conditions.
This calculator is used to determine the minimum window frame or glass U-value to avoid condensation risk. This value should be considered when selecting windows, and is based on both climate and interior humidity conditions. PHIUS+ certification requires using windows with no risk of condensation.
This stand-alone calculator is used to simulate the effect of exhaust appliances and associated make-up air systems. The results of these calculations are then input into the building's energy model.
This .zip package includes full instructions for using the Pathfinder tool and calculating site shading inputs.
This Excel-based tool from the EPA’s WaterSense program can be used for calculating hot water volume in pipes, an aid to design teams in passing the required onsite QA/QC tests of certification.
This calculator should be used for PHIUS+ multifamily projects and follows the same protocol as the Multifamily Lighting and Miscellaneous Electric Loads (MEL) document.
PHIUS has developed protocol for calculating lighting and plug load energy in multifamily buildings for both residential and common spaces. Please refer to this protocol document for details and references. In general, the protocol follows the single-family method on a per unit basis, and includes additional information for common spaces and exterior spaces.
PHIUS has created this multifamily sample project showing both methods for the dwelling unit iCFA calculation listed in the protocol. Included here are two variations of the floor plan takeoffs and calculator showing the per floor method and per unit method. Download the sample floor plans and two variations of the calculator here.
This calculator should be used for PHIUS+ 2015 single-family projects using PHPP. It includes the equivalent allowance for primary energy from the PHIUS+ allowance in kWh/person/yr to kBTU/ft2.yr, the air-tightness equivalence for 0.05 cfm/ft2.envelope to ACH50, as well as the lighting and plug load calculations for single-family residences.